Through Post Kit for Feeney DesignRail®
Help your cable railing look uniform throughout with the DesignRail® Aluminum Intermediate Post Kit by Feeney in between your beginning and end posts. The DesignRail® Aluminum Corner Post Kit is specially designed to allow cable to run continuously through the post in a 90-degree corner, which eliminates the need to double-post corners or stop and start cable runs; both clearing up your vista and lowering your material cost all in one. Perfectly pre-drilled to accommodate the 1/8 inch CableRail Kits (sold separately), these posts eliminate the need to measure and drill openings for each run of cable. Simply thread your cable through for a complete look with no extra work required.
DesignRail® Aluminum Intermediate Post Kits are available in the level heights of 36 inches and 42 inches, and a 36 inch height for the Stair design. DesignRail® Aluminum Corner Post Kits are available for both standard 36 inch and 42 inch level railing heights. These sleek posts measure in at a sturdy 2-1/2 inch width to help fade from view as you relax.
Your installation could be delayed if you are unable to disconnect a cable from a Quick-Connect® fitting! We strongly recommend adding a Release Tool to every Feeney CableRail order!
Don't forget to add lighting to your project so you can enjoy your deck longer every night! View available lighting options here.
DesignRail® Rail Kit Instructions (1.3 MB)
Feeney Catalog (20.8 MB)
DesignRail® Warranty (53.3 KB)
|Rail Types||Level and Stair|
Stair only available in Intermediate Post
|Post Types||Intermediate Post and Corner Post|
|Post Height||36 in or 42 in|
stair only available in 36 in Intermediate Post
|Post Size||2-3/8 in x 2-3/8 in|
|Post Base||5 in x 5 in|
|Package Contents||(1) Post, (1) flat post cap, (2) cap set screws, (4) mounting screws, (4) washers, and (4) screw caps|
|Warranty||View DesignRail® Warranty Information|
|Other||36 in rails require (9) CableRail Kits|
42 in rails require (11) CableRail Kits