Complete your Key-Link Horizontal Cable Railing with quality-crafted posts designed specifically for either the ends of your railing, corners of your deck, or the middle of cable runs.
Key-Link's Line Post with fittings allows you to continue a cable run through your post at moderate angles. Whether your railing takes a gentle curve, a 45-degree angle, or bends downwards into a stair railing section, the Line Post can make it happen. Line posts are 3-1/4 inches and come in 38-inch or 44-inch heights.
Key-Link's innovative End Post is outfitted with tensioner fittings to take the guesswork out of cable railing installation and eliminate the need to purchase expensive hardware. Fittings are installed to space out cables to exactly 2-7/8 inch on center. The post features a sturdy 3/8 inch welded base plate that has pre-installed hex screws to make easy work of minor leveling.
Key-Link's specially designed Corner Post allows you to avoid the hassles of having multiple posts at a corner. The 3-1/4 inch post features 1/8 inch aluminum walls. Curving from one side to the adjacent side is a tubular channel for the cable to pass through. There's no need for drilling or sleeve protectors, and definitely no need to terminate a run and begin again to achieve a 90-degree corner. With Key-Link's Cable Railing system, it is possible to install cable spans of up to 100 feet, saving you time and money.
Note: Posts have fittings for 11 cable runs for 36 inch railing and 13 cable runs for 42 inch railing.
Don't forget to order a Release Tool
Your installation could be delayed if you are unable to disconnect a cable from its fitting! We strongly recommend adding a Release Tool to every Key-Link order!
Log In