UnderDeck Wall Trim by Zip-Up
FREE GROUND SHIPPING!Orders over $999 qualify.
Quick No-Hassle ReturnsRequest. Send. Refund!
Attach the Zip-Up Wall Trim directly to the ledger board and the outside rim joists of your project to create a picture-perfect system every time. Along the outside rim joists, the Wall Trim will follow the slope of the installed Zip-Up Pitch Rails in order to achieve the proper gradient for your deck. Featuring an E-shaped profile, the Wall Trim pieces form a channel into which Zip-Up Panels and gutters (sold separately) can be inserted. Expand your family's living room out into the beauty of nature with the Zip-Up UnderDeck drainage system; an amazing option to make your unused space work for you. The Zip-Up Wall Trim should be attached via a standard deck screw approximately every 12 inches. At corners, the edges of the two Wall Trim pieces can overlap, or you may choose to miter them as you wish.
Finish off the system at the open end where a gutter may or may not be installed, depending upon your specific design. Wall Trim should be installed upside-down along the edge of the Zip-Up Panels, sliding onto the exposed end of the Panels and secured with a bead of silicone adhesive. This will allow the system to create a waterfall effect and ensure that all rainwater drains completely.
Zip-Up Wall Trim components are available in the versatile color finishes of White, Beige, and Gray and are offered in 12 foot lengths.
Start here with our handy Zip-Up UnderDeck Calculator
Add the lengths of all sides of the deck, then divide that number (in feet) by 12. If you are opting to install a gutter without using Wall Trim at the open end of the system, do not include the length of that end in your calculation.
|Colors||White, Beige, and Gray|
(Length x Height)
|12 ft x 2 in|
|Coverage Estimate||See description above|
|Warranty||View Zip-Up UnderDeck Warranty Information|