Edge Deck Screws by CAMO
Pressure-treated lumber, hardwood deck boards, Composite decking, even PVC decking material; for a smooth, attractive deck surface, CAMO Hidden Deck Fasteners can do it all. Keeping your decking surface completely unblemished, beautiful, and barefoot-friendly while securing the decking material of your choice with CAMO Deck Screws. All with no pre-drilling required. Featuring a Reverse Rake Tip, CAMO Hidden Fasteners remove the deck board material as it enters to prevent splitting or cracking of the board during installation. With a forceful lower-thread pattern, CAMO Deck Screws provide excellent holding power while the reverse upper-thread tightens the board to the joist and creates a clean, finished entry point without mushrooming.
Perfect for anchoring both solid or grooved boards without purchasing extra parts or tools, CAMO Fasteners are driven directly into the sides of the board. The CAMO method of deck board fastening is easy to install using the coordinating CAMO Marksman tools for your project specifications. CAMO Deck Tools allow you to move quickly and easily from deck board to board while delivering the exact deck board spacing you need for your project. Also boasting a Star Drive type for higher engagement with drill bits to prevent slippage and wear. CAMO Hidden Deck Fasteners secure deck boards directly to the joist reducing deck board movement and providing a tough, lasting hold without visible hardware. Need to replace a deck board years down the road? CAMO deck screws back out easily for a quick one-to-one substitution without needing to remove any of the unaffected deck boards surrounding it.
These fasteners are offered in ProTech coated or Grade 316 stainless steel. The powerful, corrosion-resistant ProTech coated steel is perfect for non-coastal or marine environments to provide a strong hold throughout the changing seasons for years to come. The impermeable Marine Grade 316 stainless steel is long-lasting and corrosion-resistant even in coastal and marine environments.
CAMO Deck Screws are available in:
1-7/8 inch length perfect for use with any nominal 5/4 inch deck board
2-3/8 inch length ideally used with any nominal 2 inch by 6 inch deck board
CAMO Hidden Fasteners include a standard CAMO Driver Bit and are offered in:
A pack of 350, to cover approximately 100 square feet.
A pack of 700, to cover approximately 200 square feet.
A pack of 1750, to cover approximately 500 square feet.
Camo Training Guide (9.59 MB)
Camo Marksman DIY Instructions (2.1 MB)
Camo Marksman PRO Instructions (2.7 MB)
Camo Warranty (233 KB)
|Decking Compatibility||Solid or grooved wood, composite, or PVC|
|Screw Length||1-7/8 in: for use with any nominal 5/4 in deck board (1 in x 5-1/4 in to 5-3/4 in)|
2-3/8: for use with any nominal 2 in x 6 in deck board (1-1/2 in x 5-1/4 in to 5-3/4 in)
|Material Type||ProTech coated: 1500 hour salt spray|
Grade 316 stainless steel: ultimate in corrosion resistance; recommended for coastal applications
|Pack Size||350 pack, 700 pack, and 1750 pack|
|Coverage Estimate||350 pack: 100 sq ft|
700 pack: 200 sq ft
1750 pack: 500 sq ft
|Package Contents||350 pack: (350) fasteners, (1) standard Camo driver bit|
700 pack: (700) fasteners, (2) standard Camo driver bits
1750 pack: (1750) fasteners, (2) standard Camo driver bits
|Other||Camo Marksman tool and driver bits sold separately|
Bit for grooved boards are not included. Please get those here.