Tucson Inset Demi-Top Post Cap by Acorn Deck Products
The square edging on the Tucson Inset Demi-Top Post cap sets off the thin inset just along its base.
As with all Acorn post caps, the Tucson is made from a single piece of cedar, Ipe, or pressure-treated pine. This eliminates any joints or glued pieces that can come apart. Additionally, the 3/8 inch inset base protects the post end grain for greater longevity. Choose from post cap sizes 3-5/8 inch or 5-5/8 inch. Acorn Wood Post Caps are ready to be treated with your choice of wood oil.
Note: Post caps must be treated, or cracking/splitting/warping can occur. Wood oil should be used on all surfaces of the cap.
Unsure about your size? Measure your posts carefully and use our Post Cap Diagram to understand critical dimensions and ensure a proper fit.
Manufacturer Brochure (227 KB
Installation Instructions (102 KB
|Material Type||Ipe, Cedar, and Pressure Treated Pine|
|Post Cap Opening Size||3-5/8 in and 5-5/8 in|
(width x depth x height)
|3-5/8 in = 5 in x 5 in x 1-1/2 in|
5-5/8 in = 7 in x 7 in x 1-1/2 in
|Inset Measurement||3/8 in|
|Warranty||View Acorn Warranty Information|
|Other||Ipe post caps come pre-treated with Penofin Hardwood Oil|