Deck Fastener Pneumatic Gun by Tiger Claw


Free Ground Shipping!

Orders over $99 qualify.

Quick No-Hassle Returns

Request. Send. Refund!
DecksDirect Sales and Support DecksDirect Sales and Support DecksDirect Sales and Support DecksDirect Sales and Support DecksDirect Sales and Support

Questions? We can help!

Call at 1-888-824-5316

The knock on hidden fasteners has always been that installing them is time-consuming. Tiger Claw has changed that with a semiautomatic pneumatic gun that shoots a screw as if it were a nail. You'll be able to install decking 50 percent faster than screwing it down with a drill/driver.

The fastener installation gun drives a UFO Ballistic NailScrew in like a nail, but can be removed like a screw. Simply slip the hidden deck fastener into the nose of the gun and position it in the groove of the board. The gun automatically enables perfect positioning of fastener and screw installation with the pull of a trigger. Builders now have a one-step installation process for hidden deck fasteners

Tiger Claw's inventors say, when compared to manually inserting the hidden deck fastener into the groove with your fingers, the gun decreases installation time by about 75%.

More Information
DecksDirect # 6164

TigerClaw Pneumatic Gun Instructions (1.3 MB) 

Type AvailableTC Gun
(width x depth x height)
11" x 4" x 13"
Package Contents(1) Pneumatic Gun, (1) Case, (1) Pair Safety Glasses, (1) Bottle Air Tool Oil, (1) Repair Supply Kit, (1) Operation Manual, and (1) Rebate for a FREE Bag of Fasteners
Operating Pressure80-100 PSI Normal; 125 PSI Max
Compatible Pneumatic ScrewsTiger Claw Stainless Steel NailScrews for TC-Gun
Tiger Claw NailScrews for TC-Gun
Compatible FastenersTiger Claw Hidden Fasteners for Grooved Boards - TCG, CONCEALoc Hidden Fasteners by TimberTech, Trex Hideaway Stainless Steel Hidden Fastener System, Fasco InvisiDeck Fastener, Beck InvisDeck Hidden SCRAIL Fastener, and Guardian Ghost Grip
Compatible DeckingAny decking with a standard groove in the edge such as Fiberon with the Tiger Claw Hidden Fasteners for Grooved Boards - TCG, Portico, Latitudes, TUFdeck Veranda, Trumarc, Monarch, Gossen, Trex, TimberTech, Guardian, and pre-grooved hardwoods. Most solid edge board thicker than 7/8 can be grooved to work with the TC-G.
WarrantyView Tiger Claw Warranty Information
FAQ How is the gun powered? The gun is pneumatic and is powered by air from a standard compressor or CO2 tank. Is there any technique to using it? Yes, there is a process for proper installation. Fully review instructions carefully before using. Is there any preventative maintenance required? Place 3 drops of oil into the air fitting before each job to prevent wear of mechanical parts. Store the tool in its carrying case when not in use to prevent damage and corrosion. Can I use fasteners packaged with screws with the gun? Yes, but TC-SG pneumatic screws would have to be purchased separately. Screws included in normal packaging are not collated and are not for use with the gun. The fasteners are not holding on the barrel. Is the tool broken? No. The tension on the fastener can be adjusted with the hex key in the replacement parts kit to desired tension.If the problem continues the replacement parts kit can be used to fully swap out the fastener retainer. See Installation Instructions.

Reviews & Questions