Speed Meets Strength - ThruLok Screw Bolt by FastenMaster

FastenMaster, a leading manufacturer of quality fasteners, introduces a new and innovative through-bolt system. This is one of the most exciting products to be introduced in 2010!

FastenMaster ThruLok

Three ThruLok's replace two 1/2 inch through-bolts, the real savings come in the installation time. With the ThruLok, pre-drilling is now a thing of the past. Simply place the ThruLok-Washer on the ThruLok screw with the teeth of the washer facing away from the head of the fastener. No pre-drilling required when properly installed. Using a 1/2" high torque variable speed drill, drive the ThruLok until washer and hex head are just above the wood surface (approx 1/4") and point of screw protrudes out other side of connection. Thread the ThruLok-Nut onto point of fastener. Hand tighten nut until flush with wood. Tighten screw with drill. Repeat to match code-compliant fastening pattern.

The ThruLok is available in three sizes: 6-1/4 inches, 7 inches, and 8 inches as well as 6 packs and 24 packs. DecksDirect currently offers free Shipping on FastenMaster Products when ordering more than $50 of FastenMaster Brand Products.

Shop ThruLok