Find the best way to tension and tighten your cable deck railing system for a long-lasting look your neighbors will notice

DecksDirect Pro Tip:
How to Tighten and Tension Your Cable Railing

ensure the longest-lasting cable railing system in one easy step

Cable railing systems can help give your space a modern, minimalistic appeal whether installing around your deck perimeter or interior staircase. Whether working with your own existing wood deck posts or with a full premium powder-coated aluminum and cable system, cable deck railing setups can add increased security to your home while keeping your backyard views clear and open as well as adding an architectural detail with the thin horizontal lines.

A low-maintenance way to add a high-performance deck railing design to your home and outdoor living space, cable railing systems simply require a wipe-down with soapy water once or twice a year and a biannual tension check. Each cable railing brand and line has its own cable tensioning sequence to follow for accurate tightening and consistent hold.

When tensioning any cable railing system, be careful not to overtighten. The cable can be released from the cable hardware and fittings if tightened beyond the maximum level.

DecksDirect Pro Tip:

Learn how to tension and tighten your cable deck railing system per your manufacturer's cable sequence and recommendation for a one-stop adjustment that lengthens the life of your railing.


Skyline Cable Railing:

With a softly rounded top rail and solid surface-mount deck posts, the Skyline cable railing system creates a strong foundation with a sleek infill

The Skyline cable railing system combines the high-intensity strength of powder-coated aluminum posts, rails and brackets with the easy-to-use Feeney CableRail Kits for a sleek, deck railing system your family and guests are sure to love. With pre-welded base plate bottoms, the Skyline Pre-Drilled Post Kits attach to the deck surface completely prepared for cable install.

Beginning with the Terminal End Post, thread your Feeney CableRail Kit through all line posts and finally to the terminating Quick Connect End Post. Pull the stainless steel wire taut until tight against the first fitting in the section.

The Skyline cable railing system creates a sleek, strong metal deck railing blended with the sleek look of stainless steel cable







The Feeney CableRail Kit for Skyline, once installed, will be tensioned by holding the Threaded Terminal fitting with pliers and spinning the included Snug-Grip Washer Nut with a wrench. Feeney recommends beginning to tension with the center run of cable and then alternating cable runs outwards until tensioning the first and last runs of cable.

Refer to the cable chart at the right to ensure you're tightening your Skyline cable railing system accurately and meeting building code. A Professional Cable Tension Gauge by Feeney is recommended to guarantee building code compliance.





KeyLink Cable Railing:

With a beveled top rail and strong, thin stainless steel wire lines, the KeyLink Cable Railing system adds a style factor to your deck

Featuring in-post cable hardware fittings, pre-drilled cable openings, and self-centering mounting brackets; the KeyLink cable railing system has put convenience first went installing your own stainless steel cable railing line. After positioning and mounting your KeyLink posts simply thread the stainless steel cable lines through the posts and then at least 1-1/4 inch into the face of the End Post Receiver. Once your cable runs all have both ends inserted into the posts, rest your body weight onto each cable to anchor the wires into the fittings.

The KeyLink cable railing system is straightforward and simple with no necessary order required when tensioning


The KeyLink Cable Railing system does not require a specific sequence to be tensioned properly, however, recommends working out from the center run for a consistent feel.

Simply insert a 3/16 inch Allen wrench into the outside face of the fitting and turn the wrench up and away from your body to tighten the cable to the level needed. A pair of Cable Gripping Pliers should be used to prevent the cable from spinning which can prevent the receiver from tightening fully.




Prestige Cable Railing:

DIY-friendly with a professional finished look, the Prestige Cable Railing allows freedom of design with ease of install

Strong without overpowering. Sleek while still making a statement, the Prestige Cable railing system brings the delicate and modern look of stainless steel wire railing to the forefront of DIY-friendly installations. Blank posts featuring a pre-welded base plate bottom allow you to create your own unique cable railing design and layout to help your home stand out on the block! Simply, position and mount your posts, drill the appropriate cable opening sizes, and run your Feeney CableRail Kits for Prestige Railing as the infill.

Solid three-inch posts and strong top rail design, the Prestige Cable Railing System protects without overpowering






The Feeney CableRail Kit for Prestige, once installed, will be tensioned by holding the Threaded Terminal fitting with pliers and spinning the included Snug-Grip Washer Nut with a wrench. Feeney recommends beginning to tension with the center run of cable and then alternating cable runs outwards until tensioning the first and last runs of cable.

Refer to the cable chart at the right to ensure you're tightening your Skyline cable railing system accurately and meeting building code. A Professional Cable Tension Gauge by Feeney is recommended to guarantee building code compliance.







Fortress H-Series Cable Railing:

Arriving to your door or jobsite in a prefabricated railing panel, the Fortress H-Series Cable Railing is both timeless and quick

The FortressCable H-Series Cable Railing system is a pre-assembled cable railing panel making it simple and straightforward to trim, mount and install. Simply position and attach your surface-mount FortressCable H-Series Posts, measure and connect your FortressCable H-Series Universal Rail Brackets, set your FortressCable H-Series Panel and enjoy!

Remove your included Mid-Span supports (in the center of the panel) and Vertical Uprights (on the outer sides of the panel), measure your post to post opening, and trim your Fortress H-Series Cable Railing Panels to size. Set your cable railing panel in place and finish connecting to the mounting brackets for a solid look guests will envy.

To tighten your FortressCable H-Series Cable Railing runs, remove the Hex Nuts hardware from the adjustable swage and apply pressure to the cable clamp until excess cable is removed. Reassemble the cable clamp and use a 13mm socket wrench to tighten the cables in the sequence below.

A Professional Cable Tension Gauge by Feeney is recommended to confirm that your cable tautness is building code compliant. Fortress recommends that the cable runs be adjusted to 250 lbs. of tension.

Strength, convenience and effortless style; the FortressCable H-Series Cable Railing line delivers

Start and finish your deck renovation project before the snow hits and it gets pushed back another year with fast, knowledgeable and friendly help from DecksDirect! Give one of our experienced deck designers a call at 1-888-824-5316 or send us an email at hello@decksdirect.com to get a complete layout and design plan for your deck, patio or porch today.

Shop Cable Railing Today