Going into concrete? The Titan Wood Post Anchor is a great solution for securing your 4x4 or 6x6 wood posts. We recommend using a 3-1/2" Caliburn XL Concrete Screw.
The Titan is made from heavy gauge formed galvanized steel and welded for maximum durability. The powder coat finish gives it a clean durable finish to withstand the elements.
The Titan Post Anchor has performed very well under lab destruction tests. A single unsupported cedar post withstood a concentrated point load of 250 lbs at 36” and 214 lbs at 42” high. When built into a railing system with other posts and directional changes, the horizontal load sustained by the railing is increased even further.
Rot starts where water regularly pools and collects. The Titan Post Anchor™ lifts the post up off the deck. It stays dry so your posts won’t rot. Traditional construction methods leave wood posts vulnerable to moisture – and rot.
|Sizes||4x4 and 6x6|
|Material Type||Powder-coated hot-dip galvanized steel|
(Width x Depth x Height)
|4x4: 5" x 5" x 5/8" (3-1/2" tube)|
6x6: 7-1/2" x 7-1/2" x 5/8" (4-3/4" tube)
|Package Contents||4x4 without hardware: (1) Post Anchor|
4x4 with hardware: (1) Post Anchor, (4) 3/8" x 5" galvanized lag bolts, and (8) 1/4" x 3" black square drive, pan head lags (ACQ compatible)*
6x6 without hardware: (1) Post Anchor
6x6 with hardware: (1) Post Anchor, (5) 3/8" x 5" galvanized lag bolts, and (8) 1/4" x 3" black lag bolts (ACQ compatible)*
*Please note: kits no longer include washers. 4x4 hardware may vary.
|Other||For the installation of the Titan Wood Post Anchor into concrete, the manufacturer recommends using a minimum of (6) 19/64" x 3-1/2" GRK Caliburn Concrete Screws per anchor.|
|Manufacturer||Titan Wood Post Anchor|