Available in three different styles: NM, TT & TX.

Invisi-Fast™ NM works with several pre-grooved boards including Monarch, Fiberon, Veranda, Latitudes, Gossen and others. Invisi-Fast NM also works on boards with machined in grooves that are cut using a standard biscuit joiner or router. Provides 3/16” board spacing.
Invisi-Fast™ TT was designed to perfectly compliment the Timber-Tech grooved boards. Provides 3/16” board spacing.
Invisi-Fast™ TX was custom designed to work with the Trex and Elk Crosstimbers grooved boards. Provides 1/4” board spacing.
Invisi-Fast™ TQ was designed to be used on 3/4” deck boards. You can choose deck board spacing of either 1/8” or 3/16”. Groove dimension is 1/8” cut 1/2” deep.

Features
*Innovative above deck fastening design.
*Compatible with Composite, Hardwoods, Treated (including the new ACQ treated lumber), Cedar and Vinyl.
*Made of DURABLE CLEAR, UV Resistant, Lexan equivalent material that can be painted.
*Exceptional holding power.
*Easy to install for the average homeowner.

Advantages
*Easy to install from above.
*Will not corrode like galvanized deck fasteners.
*Invisi-Fast fasteners cost less per square foot than most other hidden deck fastening systems.
*The Invisi-Fast hidden deck fastener allows for individual board replacement should a deck board ever get get damaged.
*No special tools needed to install.
*The Invisi-Fast Hidden Deck Fastener is guaranteed to last longer than your deck!

Biscuit Fastener Installation Instructions


Step 1: Insert Invisi-Fast Biscuit fastener into one side of grooved board. Center the fastener perpendicular to the joist, making sure the screw hole lies in the center of the joist.


Step 2: Insert screws into Invisi-Fast Biscuit, place on joist groove, do not tighten completely.


Step 3: Slide next board into place. Now tighten the trim screw.

Optional Step 4: Use the standard Invisi-Fast No-Spacer on your first, last board and stairs to create a complete screw/nail free surface. Invisi-Fast No-Spacer sold separately.