You have no items in your shopping cart.
More Views
Product Description
Key Features
• Stronger design shear values than 1/2" lags.
• IBC/IRC Code Compliant ESR# 1078.
• Built in washer head design eliminates the need for additional washer.
• Proprietary three step coating process protects against corrosion, even in pressure treated wood. ACQ approved.
Installation Procedures
The FastenMaster LedgerLok should be installed using a high torque, 1/2" variable speed drill (at least 14.4V if cordless). Choose the proper length LedgerLok so that threads fully engage the main member (i.e. rim joist). Bring washer flush to side member do not countersink. Lateral Design Values (Table goes here) * SCL=Structural Composite Lumber (LVL,PSL and LSL) ** Wood species identified typically have average specific gravity similar to the values shown on this table.
Technical Data
Ledger Board Attachment Comparative Data The statement Faster, Easier, Stronger Than 1/2" Lag Screws relates to the comparison of design shear values of LedgerLoks and 1/2" lag screws. The Professional Engineer (PE) is responsible for designing all connections, which include the number and location of all fasteners to meet the national and local code requirements. All minimum end, edge and spacing distances of the LedgerLok should follow minimums set forth in ICC ESR-1078. (see www.fastenmaster.com). This report should be reviewed thoroughly when designing connections. Note: Photographs on this package showing LedgerLok usage should not be used as a reference for fastening patterns. For complete design values and engineering data, available through ICC-ES, see report ESR-1078 at www.icc-es.org. For technical assistance or backup information, please contact FastenMaster Technical Support at 1-800-518-3569.
• Stronger design shear values than 1/2" lags.
• IBC/IRC Code Compliant ESR# 1078.
• Built in washer head design eliminates the need for additional washer.
• Proprietary three step coating process protects against corrosion, even in pressure treated wood. ACQ approved.
Product Specifications | |
|---|---|
| Drive Type | Hex |
| Head Type | Hex |
| Screw Length | 3-5/8" and 5" |
| Screw Size | 1/4" |
| Colors | Steel |
| Material Type | Steel with 3 layer epoxy coating |
| Pack Size | 12, 50 and 250 packs |
| Coverage Estimate | n/a |
| Included Accessories | (1) 5/16" driver bit |
| Warranty | LedgerLok Guarantee of Performance |
| Other | Not designed for use in masonry or concrete |
Installation Procedures
The FastenMaster LedgerLok should be installed using a high torque, 1/2" variable speed drill (at least 14.4V if cordless). Choose the proper length LedgerLok so that threads fully engage the main member (i.e. rim joist). Bring washer flush to side member do not countersink. Lateral Design Values (Table goes here) * SCL=Structural Composite Lumber (LVL,PSL and LSL) ** Wood species identified typically have average specific gravity similar to the values shown on this table.
Technical Data
Ledger Board Attachment Comparative Data The statement Faster, Easier, Stronger Than 1/2" Lag Screws relates to the comparison of design shear values of LedgerLoks and 1/2" lag screws. The Professional Engineer (PE) is responsible for designing all connections, which include the number and location of all fasteners to meet the national and local code requirements. All minimum end, edge and spacing distances of the LedgerLok should follow minimums set forth in ICC ESR-1078. (see www.fastenmaster.com). This report should be reviewed thoroughly when designing connections. Note: Photographs on this package showing LedgerLok usage should not be used as a reference for fastening patterns. For complete design values and engineering data, available through ICC-ES, see report ESR-1078 at www.icc-es.org. For technical assistance or backup information, please contact FastenMaster Technical Support at 1-800-518-3569.
Additional Information
| Manufacturer | FastenMaster |
| Documentation |
Product Literature (403 KB) LedgerLok Warranty (119 KB) |
