Features
* Compatible with Composite, Hardwoods, Treated (Including the new ACQ treated lumber), Cedar, and Vinyl.
* Made of DURABLE CLEAR, UV Resistant, Lexan equivalent material that can be painted.
* Unique Overhang Tabs for hands free attachment.
* Exceptional holding power.
* Proper gapping with the built on spacer, creates confidence that the decking boards will not be compromised by improper spacing.
* Easy to install for the average homeowner.

Invisi-Fast Angle Kit
Kit includes 88 pieces with a spacer, 12 pieces without a spacer (for first & last board fastening), 300 ACQ Compatible Square Drive Deck Screws, 1 Square Driver.
Covers approx. 50 sq. feet.

Angle Fastener Installation
Step 1: When using the Angled Fastener, you may have to screw the first corner board down from the top, if there is insufficient room to attach fastener from below.

*For a more sound deck and to prevent squeaks, we recommend applying a 3/8” bead of Silicone or Construction Adhesive along joist before installing Invisi-Fast™ hidden deck fastener to help fill in voids and imperfections on the mating surfaces between the joist and deck boards. Not applying adhesive will not compromise stability.
Check with your decking manufacturer to verify warranty coverage.


Step 2: Using the Invisi-Fast™ Angle with spacer, slide the convenient overhang tabs under your first deck board for hands free attachment. Then using an approved deck screw, fasten the Invisi-Fast™ Angle to the joist using a lower hole.

We recommend one screw to be fastened into the joist. The other 2 holes are to be used as backups if wood imperfection is present.


Step 3: Secure the deck board by using the corresponding upper hole. Slide your second board into place. Secure deck board by using the remaining upper hole.

Continue this process for the length of the joist.

Note: When 2 boards meet each other on a joist, install an Invisi-Fast™ Angle on each side of the joist.


Step 4: Repeat this process until the last deck board.

Note: Prior to securing the final board, cut your board to size if necessary. Using the Invisi-Fast™ without a spacer, secure the Invisi-Fast™ to the inside perimeter board (rimboard) using the lower hole. Then once all perimeter fasteners are secure, fasten your final deck board using the upper deck board holes.