Check items to add to the cart or select all
More Views
Product Description
This is a special limited edition 4x4 post anchor made of 316 marine grade stainless steel with a 5" tube instead of the standard 3.5" length. Designed for people who wanted a final solution for harsh marine environments. There is a limited quantity available.
Use a 1.25" diameter hole saw (1-7/8" inside depth) to prepare post with a circular pilot cut to guide cutting edge of tube. Then driven the tube into the post as shown in installation video. If intended to be used with composite and hard wood posts different installation techniques apply because of the hardness of those materials.
The Titan Post Anchor™ is a wood post anchoring device that blends form and function in a way never before conceived. Attaching wood posts to any horizontal surface for railings or as stand alone components for signs, gates, small fences and more is now quick and easy and best of all – lasts a lifetime.
The Titan is made from heavy gauge formed galvanized steel and welded for maximum durability. The powder coat finish gives it a clean durable finish to withstand the elements.
The Titan Post Anchor has performed very well under lab destruction tests. A single unsupported cedar post withstood a concentrated point load of 250 lbs at 36” and 214 lbs at 42” high. When built into a railing system with other posts and directional changes, the horizontal load sustained by the railing is increased even further.
Rot starts where water regularly pools and collects. The Titan Post Anchor™ lifts the post up off the deck. It stays dry so your posts won’t rot. Traditional construction methods leave wood posts vulnerable to moisture – and rot.
Installation:
1. Cut the post.
2. Drill a guide hole with a hole saw.
3. Drive the anchor into the post
4. Finish with 4 lag bolts
Use a 1.25" diameter hole saw (1-7/8" inside depth) to prepare post with a circular pilot cut to guide cutting edge of tube. Then driven the tube into the post as shown in installation video. If intended to be used with composite and hard wood posts different installation techniques apply because of the hardness of those materials.
The Titan Post Anchor™ is a wood post anchoring device that blends form and function in a way never before conceived. Attaching wood posts to any horizontal surface for railings or as stand alone components for signs, gates, small fences and more is now quick and easy and best of all – lasts a lifetime.
The Titan is made from heavy gauge formed galvanized steel and welded for maximum durability. The powder coat finish gives it a clean durable finish to withstand the elements.
The Titan Post Anchor has performed very well under lab destruction tests. A single unsupported cedar post withstood a concentrated point load of 250 lbs at 36” and 214 lbs at 42” high. When built into a railing system with other posts and directional changes, the horizontal load sustained by the railing is increased even further.
Rot starts where water regularly pools and collects. The Titan Post Anchor™ lifts the post up off the deck. It stays dry so your posts won’t rot. Traditional construction methods leave wood posts vulnerable to moisture – and rot.
Installation:
1. Cut the post.
2. Drill a guide hole with a hole saw.
3. Drive the anchor into the post
4. Finish with 4 lag bolts
Product Specifications | |
|---|---|
| Colors | Stainless steel |
| Sizes | 4x4 |
| Material Type | Stainless steel |
| Dimensions (Width x Depth x Height) | 5" x 5" x 5/8" |
| Included Accessories | None |
| Warranty | n/a |
| Other | For the installation of the Titan Wood Post Anchor into concrete, the manufacture recommends using a minimum of (6) 19/64" x 3-1/2" GRK Caliburn Concrete Screws per anchor. |
Additional Information
| Manufacturer | Titan |
You may also be interested in the following product(s)
|
Titan Wood Post Anchor Gasket Kit
Starting At:
$5.00
|
Titan Wood Post Anchor Skirt
Starting At:
$9.77
|
Titan Wood Post Anchor
Starting At:
$14.79
|
