Pro Packs include 1750 screws for 500 sqft of decking
Deck Packs include 350 screws for 100 sqft of decking

TRANSVERSE™ THREADING
Eliminates "mushroom" effect common to composite decking installed using standard deck screws without pre-drilling by preventing debris from the hole from forming a mound around the screw head.

SPECIAL HEAD DESIGN
Further prevents "mushroom" effect by trapping and pulling back any residual debris under the head.

GRADE 305 STAINLESS STEEL
Provides superior protection against staining and corrosion.

COLOR COATED HEADS
Six (6) head colors are available to blend with a wide range of composite deck board colors.

AUGER POINT
For faster, easier entry.

STAR RECESS
Extra deep T-20 star recess to minimize the "wobble" at screw starting found in other brands.

ACQ-RATED
Approved for use with ACQ treated lumber.

SELECTING A HEAD COLOR
* Consider how you will maintain your deck as well as the likely effects of weathering when selecting a head color for your decking.
* Composite decking may be subject to various degrees of fading. (Check with your deck board manufacturer to know what to expect.)

PRE-DRILLING
HEADCOTE® Composite deck screws are designed to avoid the step of pre-drilling. Pre-drilling, however, may still be desirable or necessary in some instances. Please read through the following guidelines before you decide whether to opt for our composite fastener. In addition, test HEADCOTE® Composite in your decking first. And most importantly, READ THE MANUFACTURER'S INSTALLATION INSTRUCTIONS FOR THE DECK BOARD YOU ARE USING.

* Some cellular PVC ("plastic") decking, such as Azek Deck, will accept Standard HEADCOTE® 305 without the need for pre-drilling. As a general rule, do not use composite screws in these all-plastic products. (Check with your deck board manufacturer's installation instructions for recommendations.)
* Highly dense composite decking material often requires pre-drilling. (Check with your deck board manufacturer's installation instructions.) For these instances, using Starborn's SMART-BIT® pre-drilling and countersinking tool together with Standard HEADCOTE® 305 deck screws -- the SMART-BIT®/HEADCOTE® System -- is recommended.
* For some deck board brands, installing in cold weather will necessitate pre-drilling. (Check with your deck board manufacturer's installation instructions for recommendations.)
* Even where composite screws are adequate, occasionally very small ridges may form around the screw heads. In these instances, you may opt to use the SMART-BIT®/HEADCOTE® System.
* Even in situations where composite screws are being used, pre-drilling is still strongly advised at the ends of each board and where deck boards meet to avoid splitting. In these instances, use SMART-BIT® in combination with your HEADCOTE® Composite screw. Note that although HEADCOTE® Composite deck screws are #10 gauge, due to their smaller head diameter you should pre-drill using a #8 Trim Head SMART-BIT® tool.
* The SMART-BIT®/HEADCOTE® System will always guarantee the best results of any face screwing system available. The screw will be perfectly countersunk, with no mushrooming, raised edges, or rough edges.

HEAD COATING
* The coating used for HEADCOTE® stainless steel deck screws has been specially formulated for durability.
* Like all coatings in outdoor and flooring applications, it is subject to wear and tear based on exposure to the elements and foot traffic.