Check items to add to the cart or select all
-
-
-
-
EZMAXC LED Transformer$173.00
More Views
Weather Proof Wire Nuts
Be the first to review this product
Quick Overview
Wire Gauge: 18 Gauge (for LED lights), 12 Gauge and 10 Gauge (for incandescent lights)
Quantities Available:
18 gauge = 10 pack or 150 pack quantities.
12 gauge = 20 pack or 100 pack quantities.
10 gauge = 10 Packs
Quantities Available:
18 gauge = 10 pack or 150 pack quantities.
12 gauge = 20 pack or 100 pack quantities.
10 gauge = 10 Packs
Product Description
Weather Proof Wire Nuts - Waterproof Connectors
Use with outdoor low voltage deck lights or any wet location connections.
* Essential for connections exposed to condensation, water, vapors or dust
* Eliminates the need for heat shrink or anti-corrosion devices
* Corrosion proof
* Long lasting
* Reduces fire risk
These silicone filled connectors can be used with the utmost confidence anywhere, especially where exposure to moisture or deteriorating agents exist. No more heat shrink, resin packs, or multi-piece corrosion kits are needed! These waterproof and direct burial connectors are for copper to copper connections only.
Installation Instructions
IMPORTANT: Turn off power before installing or removing connector. Product to be used in accordance with local and national codes.
1. Strip Wire - 1/2" for 18 gauge wire nuts or 5/8" for 12 gauge wire nuts.
2. Align any frayed strands or conductors
3. Pre-twisting unnecessary. Place stripped wires together with ends of insulation even.
4. Twist connector onto wires pushing firmly until hand-tight. Do not over torque.
5 Wipe sealant in and around conductors and connector opening with tightening. Do not reuse.
• Go to on-line lighting guide
• Download Lighting Guide .pdf
(4.50 MB)
Use with outdoor low voltage deck lights or any wet location connections.
* Essential for connections exposed to condensation, water, vapors or dust
* Eliminates the need for heat shrink or anti-corrosion devices
* Corrosion proof
* Long lasting
* Reduces fire risk
These silicone filled connectors can be used with the utmost confidence anywhere, especially where exposure to moisture or deteriorating agents exist. No more heat shrink, resin packs, or multi-piece corrosion kits are needed! These waterproof and direct burial connectors are for copper to copper connections only.
Installation Instructions
IMPORTANT: Turn off power before installing or removing connector. Product to be used in accordance with local and national codes.
1. Strip Wire - 1/2" for 18 gauge wire nuts or 5/8" for 12 gauge wire nuts.
2. Align any frayed strands or conductors
3. Pre-twisting unnecessary. Place stripped wires together with ends of insulation even.
4. Twist connector onto wires pushing firmly until hand-tight. Do not over torque.
5 Wipe sealant in and around conductors and connector opening with tightening. Do not reuse.
Lighting Guide
DecksDirect.com created this Lighting Guide to empower you with the basics of lighting options, deck light planning and deck light installation.• Go to on-line lighting guide
• Download Lighting Guide .pdf
(4.50 MB)You may also be interested in the following product(s)
|
Direct Bury Wire Nuts by Highpoint Deck Lighting
$17.99
|
TimberTech Silicone filled Wire Connectors
Regular Price:
$30.00
Special Price: $14.97 |
Kichler Pro Series Wire Connector
Starting At:
$67.00
|
Scotchlok Quick Connects by 3M
Starting At:
$8.00
|
