Check items to add to the cart or select all
More Views
Product Description
GRK's FIN/Trim Head screws are an excellent choice for most fine carpentry applications and more. They are also ideal for the installation of window extension jambs. Our FIN/Trim Head screws have the smallest screw head on the market; With sizes available from 1"1/4(30 mm) to 5"(125 mm), users have plenty of choice.
The FIN/Trim Head screw's exceptionally small head, along with the W-Cut thread design, prevent most material splitting. Pre-drilling is only necessary if the building material's limitations require a pilot hole to be drilled. (Always consult wood supplier's / manufacturer's recommendations)
FIN/Trim Head screws come with Climatek corrosion protection. This will come in very handy when using our Trim screws in vinyl or composite decking.
FIN/Trim Head screws are self-tapping screws with a W-Cut thread design, ZipTip, and Climatek coating.
FOR BEST RESULTS, TRIM SCREWS SHOULD BE DRIVEN AT HALF SPEED.
TO PROLONG THE LIFE OF THE #10 BIT,
DO NOT USE AN IMPACT DRIVER ON THE #8 TRIM HEAD SCREW
The FIN/Trim Head screw's exceptionally small head, along with the W-Cut thread design, prevent most material splitting. Pre-drilling is only necessary if the building material's limitations require a pilot hole to be drilled. (Always consult wood supplier's / manufacturer's recommendations)
FIN/Trim Head screws come with Climatek corrosion protection. This will come in very handy when using our Trim screws in vinyl or composite decking.
FIN/Trim Head screws are self-tapping screws with a W-Cut thread design, ZipTip, and Climatek coating.
FOR BEST RESULTS, TRIM SCREWS SHOULD BE DRIVEN AT HALF SPEED.
TO PROLONG THE LIFE OF THE #10 BIT,
DO NOT USE AN IMPACT DRIVER ON THE #8 TRIM HEAD SCREW
Additional Information
| Manufacturer | GRK Fasteners |
You may also be interested in the following product(s)
|
R4 Deck Screws by GRK Fasteners
Starting At:
$44.99
|
Reverse Thread (RT) Trim Head Screws by GRK Fasteners
Starting At:
$44.99
|
